Wednesday, February 18, 2009

Alinco DR-599 VHF/UHF Transceiver

Alinco DR-599 Image
ALINCO DR-599




Alinco DR-599 VHF/UHF Transceiver. This is a used Alinco DR-599 VHF/UHF Transceiver in good conditions, and it works flawlessly. The Alinco DR-599T 2M/440 FM mobile combines rugged, high-tech design with user-friendly operation. It provides up to 45 watts output on 2 meters and 35 watts on 70 cm at three different power levels. There are separate knobs for volume/squelch on each band. You can even monitor both bands at once with simultaneous dual band receive. Crossband repeat is supported. You get a total of 40 memories: 28 regular, 1 call channel per band and 10 ARM (automatic repeater memory function). CTCSS encode is built in. Tuning steps: 5, 10, 12.5, 20 and 25 kHz. The back panel features separate SO-239 antenna jacks for 2 meters (SO239) and 440 (N). Additionally, there are separate 8 ohm mini audio output jacks for VHF and UHF. To see the actual pic size of the radio, please click on this link --> Alinco DR-599 Picture.

Spec as follows:

Type:               Amateur VHF/UHF Transceiver
Frequency range:    2m / 70cm             
Mode:               FM
RF Power output:    Hi: ?/? W
Low: ?/? W
Sensitivity:        N/A
Selectivity:        N/A
Image rejection:    N/A
Voltage:            13.8 VDC 
Impedance:          50 ohms, SO-239
Dimensions (W*H*D): N/A
Weight:             N/A
Manufactured:       Japan 199x-19xx

The radio is belong to my friend, Mr. Ali. Should you have any question, please feel free to contact him via his mobile phone: 085.234.333333.
Thanks & ‘73s
PS: Sold!